StartupLaunchBeijing, CN
iSpace (Interstellar Glory)
China's first private company to reach orbit.
- Stage
- Series C+
- Founded
- 2016
Timeline 18 moments
Latest · Interstellar Glory shifts its main development focus to Hyperbola-3 and outlines its reusable-launch strategy 6d agoAbout
Beijing-based commercial launch company (星际荣耀), founded 2016. First private Chinese company to reach orbit (Hyperbola-1, July 2019). Developing the reusable methane-fueled Hyperbola-3 targeting 8,500 kg to LEO and first-stage sea recovery in 2026.
iSpace, officially known as Beijing Interstellar Glory Space Technology, is a Chinese commercial launch provider developing small and medium-lift rockets. The company made history in July 2019 when its Hyperbola-1 solid-propellant rocket successfully reached orbit, marking the first time a private Chinese space company achieved orbital flight.
The company is currently developing the Hyperbola-3, a larger, reusable launch vehicle powered by liquid oxygen and liquid methane. Designed to lift up to 8,500 kg to low Earth orbit, the Hyperbola-3 incorporates vertical takeoff and vertical landing (VTVL) technology, with the company targeting first-stage sea recovery by the end of 2026.
Cai Jingqi founded the company in 2016. It is headquartered in Beijing, China.
Timeline
2026 15 moments
- Announced 89 FOMO
Interstellar Glory shifts its main development focus to Hyperbola-3 and outlines its reusable-launch strategy
Chairman Peng Xiaobo confirmed that the company has shifted its primary focus from Hyperbola-1 and Hyperbola-2 to the medium-to-heavy reusable Hyperbola-3 liquid rocket. The first flight is targeted for late 2026 or 2027, with an objective of achieving orbital insertion and first-stage recovery in the same mission. The company reported more than 100 major tests completed during 2026. Management described a design target of reducing full-vehicle cost to approximately one-third after eight first-stage reuses, subject to successful recovery, manageable refurbishment costs and sufficient launch cadence. The planned Chengdu manufacturing facility is expected to support 20 vehicles annually after completion in 2027.
- Success 58 FOMO
Hyperbola-3 interstage and aft thrust structures pass static load testing
The company completed static tests of the interstage and aft thrust-load-transfer structures, two major load-bearing vehicle sections. The interstage assembly consists of three sections with a combined height of approximately seven metres. The testing evaluated structural strength and stiffness under demanding loading conditions, including the forces associated with first-stage flight, grid-fin operation, engine thrust and recovery. Results were reported as consistent with design predictions.
- Announced 54 FOMO
Interstellar Glory begins preliminary research on heavy-lift Hyperbola-9
The company announced that preliminary research had begun on a heavy-lift vehicle designated Hyperbola-9. The programme is intended to address future crewed lunar exploration, Mars exploration and deep-space missions. The announcement came as part of the company's tenth-anniversary communications. The company did not publish a detailed technical specification or development schedule in the announcement.
- Success 71 FOMO
Hyperbola-3 methane and common-bulkhead tanks pass ultimate-load structural tests
The company completed ultimate-load tests on two major propellant-tank structures. The testing captured stress, pressure and deformation data while progressively loading the tanks to failure. Measured burst-pressure deviations from predictions remained within the reported tolerances. The results provide data for structural-margin verification, design optimisation and manufacturing-process improvements.
- Success 54 FOMO
Hyperbola-3 5.2-metre payload fairing passes static load qualification
The payload fairing passed a static structural test covering the flight load envelope. The test assessed the strength of the forward cone, cylindrical sections, separation interfaces and load-transfer structures. The company reported that measured data closely matched simulation predictions. The result completed the fairing's separation and static-load verification programme.
- Success 89 FOMO
Interstellar Glory completes first closing of nearly RMB 1 billion Series E
The company completed the first closing of its Series E financing, raising nearly RMB 1 billion. Bank-affiliated asset investment companies were the principal investor group, while the full round remained open. The proceeds target four priorities: Hyperbola-3 development and production, Focus-2 engine capacity, launch and sea-recovery infrastructure, and heavy-lift rocket research. The financing is intended to accelerate the company's reusable launch programme.
- Success 89 FOMO
Interstellar Glory completes full sea-recovery rehearsal for Hyperbola-3 first stage
The company used its Xingji Guihang recovery ship and a mechanical first-stage pathfinder to rehearse the full offshore recovery workflow. The exercise covered port mooring, sea states three and four, the recovery sequence, sea state five and return-to-port operations. It tested the recovery vessel, structural interfaces, communications, launch-support equipment and onboard systems. The exercise is a major preparatory step toward the planned first orbital launch and sea recovery.
- Success 72 FOMO
Hyperbola-3 sea-recovery navigation system passes drone flight simulation
The company used an unmanned aircraft carrying rocket navigation equipment alongside the recovery ship to simulate the final stages of booster recovery. The test assessed relative positioning, communications and coordinated operation between the airborne and shipboard systems. The company reported that the navigation system completed its ground verification and was ready to participate in flight testing.
- Success 82 FOMO
Hyperbola-3 first-stage landing structure passes impact qualification testing
The company completed a series of landing-impact tests covering the first-stage structure and landing gear. Testing progressed through four-leg, two-leg and single-leg impact scenarios to reproduce extreme touchdown conditions. It evaluated structural stability, onboard equipment response and sea-recovery shutdown criteria. The company reported that measured dynamic responses met design requirements and closely matched simulation results.
- Success 67 FOMO
Hyperbola-3 first-stage auxiliary propulsion system passes full-system test
The cold-gas auxiliary propulsion system completed a full-system test under conditions matching the planned flight configuration and sequence. The system combines attitude control for first-stage return and landing with propellant settling during the recovery phase. The test verified coordinated operation, commanded engine starts and shutdowns, and component compatibility. The company said the system was ready for delivery to final vehicle assembly.
- Planned 78 FOMO
Interstellar Glory moves Hyperbola-3 maiden flight target to the end of 2026
Deputy general manager Xie Hongjun stated that the company's reusable Hyperbola-3 rocket was expected to make its maiden flight by the end of 2026. The intended mission aims to achieve orbital insertion and first-stage sea recovery. The announcement updated earlier expectations of a first-half 2026 launch and provided a revised public target.
- Success 98 FOMO
Interstellar Glory raises RMB 5.037 billion in D++ financing
The company completed a RMB 5.037 billion financing round, setting a reported record for a single financing transaction by a Chinese private launch company. Tongchuang Weiye and existing shareholder Jingming Capital jointly led the investment. Existing shareholders and new institutional investors also participated. Capital will support reusable methalox launch vehicle development, manufacturing, testing, launch infrastructure and maritime recovery capabilities.
- Success 67 FOMO
Hyperbola-3 second-stage common-bulkhead tank passes cryogenic static testing
The second-stage common-bulkhead tank passed a cryogenic static test covering multiple load conditions and operational scenarios. The test also evaluated the pressurisation and propellant-feed system and compatibility with associated electrical equipment. The company reported that all measurements met design expectations and that the tank had reached flight-test readiness.
- Success 78 FOMO
Focus-2 methalox engine completes flight-configuration matching test with Xingkong-3 control system
The company completed a combined test of the Focus-2 engine and Xingkong-3 control system using the engine's intended vehicle-installed configuration. The test evaluated operational reliability and coordinated behaviour between propulsion and flight-control systems. The engine was intended for the first Hyperbola-3 flight vehicle. The company said the result provided further preparation for the maiden launch.
- Success 45 FOMO
Hyperbola-3 fairing turnover transporter passes 16-cycle full-scale load test
The company tested a turnover transporter used to move the fairing and payload assembly between vertical and horizontal orientations. The equipment carried a full-scale simulated assembly and completed 16 consecutive turnover cycles. The exercise validated structural load capacity, mechanical interfaces and operational safety, supporting the ground-handling infrastructure for Hyperbola-3.
2025 3 moments
- Success 68 FOMO
Hyperbola-3 landing gear passes deployment and impact qualification
The company completed a series of deployment and impact tests for the first-stage landing gear. Sixteen load cases were designed to reproduce demanding maritime recovery conditions. Testing assessed deployment reliability, impact loads, structural response and energy absorption. The validated hardware was scheduled to enter final assembly for the first orbital and sea-recovery flight vehicle.
- Planned 71 FOMO
Interstellar Glory targets first-half 2026 Hyperbola-3 orbital flight with sea recovery
The company announced an ambitious maiden-flight objective combining orbital insertion with first-stage sea recovery. Preparations included ground-system integration, vehicle transport, erection and launch-pad compatibility testing at Wenchang. The rocket was designed around a reusable liquid oxygen-methane first stage and maritime recovery infrastructure. The schedule was subsequently revised to an end-of-2026 target.
- Success 57 FOMO
Hyperbola-3 5.2-metre fairing passes separation test
The company completed a separation test of the payload fairing, validating commanded unlocking and separation operations. The test gathered data on fairing deformation, separation velocity and impact response. All reported indicators met design requirements, providing an important qualification input for future flight operations.
Signals
- 93 成本劈至三分一 商業火箭量產肉搏戰 香港文匯報
- 68 星际荣耀完成双曲线三号运载火箭典型舱段静力试验 泰伯网
- 97 双曲线三号火箭成功完成公里级垂直回收试验 可重复使用技术取得突破 SpaceNews China
- 63 星际荣耀官宣重型型号“双曲线九号”火箭已启动预研 IT之家
- 79 星际荣耀完成可回收大型液体运载火箭 SQX-3 贮箱极限载荷静力试验 IT之家
- 64 距首飞更近一步,星际荣耀 SQX-3 运载火箭整流罩静力试验取得成功 IT之家
- 92 星际荣耀完成 E 轮融资近 10 亿元首批交割,加速双曲线三号可回收火箭首飞 IT之家
- 92 正式回收前的“模拟考试”,星际荣耀完成 SQX-3 运载火箭回收一子级海上合练试验 IT之家
Headquarters
iSpace (Interstellar Glory) is headquartered in Beijing, China (39.90°N 116.41°E).
Hardware Fleet
iSpace's two-stage reusable methane-LOX rocket, 69m tall, targeting 8,500 kg to LEO in reusable mode and 13,400 kg expendable. First orbital flight and first-stage sea recovery targeted for 2026.
Live simulation
Interactive browser-native 3D flight telemetry for iSpace (Interstellar Glory)'s hardware.