Engineering/Spaceplane
Electronics Engineer – Avionics | Spaceplane
at Dawn Aerospace: Aurora spaceplane and green satellite thrusters
- Where
- Christchurch, Canterbury, New Zealand
- Level
- Mid
- Clearance
- None
- Posted
- 5d ago
What you'd work with
Pulled from the posting by SpaceFOMO. Check the original before you apply.
The posting
Our Mission: Fly to space twice in a day.
We’re looking for an Electronics Engineer to join our Avionics Team in Christchurch, designing and testing flight electronics and PCBAs for Aurora, our reusable rocket-powered spaceplane.
Aurora takes off from a runway, flies to the edge of space, lands, and flies again. Our first rocket-powered aircraft, the Aurora Mk-II A, has flown 64 missions to date. Now we’re building the next generation.
The Role
As an Electronics Engineer in the Avionics Team, you’ll develop flight-ready electronics for the Aurora Mk-II B Spaceplane, taking hardware from concept and schematic design through PCB layout, qualification, production and flight testing.
You’ll have end-to-end ownership of avionics hardware and work closely with systems engineers and the wider Avionics Team to make sure your designs are built well, tested properly and ready for flight.
You’ll also get to see the hardware you designed fly during test campaigns, review the results and feed what you learn into the next iteration.
What You’ll Do
- Design mixed-signal, power, and embedded PCBAs for Aurora, from architecture trades and definition of requirements, through to component selection, schematic capture, and layout in KiCad.
- Apply ECSS and NASA design practices: derating, worst-case analysis, FMECA, and fault-tolerant architectures.
- Plan and run development, qualification, and acceptance test campaigns (vibration, thermal, EMC), and push designs to their limits.
- Perform hardware bring-up, debug, and find the root cause of problems at board and system level.
- Support flight campaigns, review flight data, and feed lessons back into the next revision.
- Work directly with the systems, propulsion, software, airframe, certification, and operations teams.
What we’re looking for
- A degree in Electronics, Electrical, or Mechatronics Engineering, or equivalent demonstrated ability.
- About 3 years of hands-on experience designing, building, and testing electronics hardware. Industry, research, and serious personal projects all count.
- Strong circuit design fundamentals and demonstrated PCB design ability in KiCad, Altium, or similar.
- Confidence with lab equipment (oscilloscopes, power supplies, electronic loads) and basic test scripting in Python.
- Clear technical communication, written and verbal.
- Demonstrated ability to own and deliver complex technical projects in a fast-paced environment.
What will set you apart
- Experience with high-reliability or fault-tolerant design under ECSS, NASA, aerospace, automotive, or medical standards.
- Experience with electromechanical design, familiarity with MCAD (SolidWorks in particular).
- Experience with component selection for extreme environments (vibration, temperature), and working through supply-chain constraints.
- Experience in environmental qualification for space or other extreme environments (HALT/ALT testing, Thermal/T-vac Chamber testing).
You don't need a space background. We hire engineers from automotive, defence, medical, motorsport, and consumer hardware. If you meet most of the list, apply.
What we offer
Flight hardware, not PowerPoint engineering.
- See designs progress from schematic to PCB to qualification to aircraft.
- Work directly alongside propulsion, software, airframe and flight operations.
- Hardware you design can end up flying on Aurora.
- Real technical ownership rather than being one engineer inside a huge programme.
Diversity & Inclusion
At Dawn Aerospace, we believe that diverse teams build better solutions. We are committed to creating an inclusive environment where people of all backgrounds, identities, and experiences are valued and supported to do their best work.
About Dawn Aerospace
Dawn Aerospace is a space transportation company with a purpose. Our mission is to enable the next generation of space users by providing more sustainable and scalable ways to access and move around in space. We believe this access, in the form of a transportation network, will fundamentally change what’s possible from space. We currently focus on three areas of space transportation:
- In-space propulsion
- In-space propulsion
- In-space servicing
- In-space servicing
- Spaceplane
- Spaceplane
Our international teams are distributed across four locations: the Netherlands, France, New Zealand, and the USA.
Apply for this Job
Important!
If you think you have what it takes but are unsure that you check every box, we still want to hear from you.
To all recruitment agencies: Dawn Aerospace does not accept agency resumes. Please do not forward resumes to our job’s alias, our employees, or any other company location. Dawn Aerospace will not be responsible for any fees related to unsolicited resumes.
Source: Dawn Aerospace's job board · seen 3d ago, still listed 3d ago
Apply at Dawn AerospaceOther companies hiring for this
-
Senior Avionics Engineer, Lunar
17d agoVast Long Beach, California, United States Senior 147k–209k
EMI/EMCThermal vacuum (TVAC) testingEthernetMIL-STD -
Radiation Metrology and Test Engineer
18d agoCowboy Space San Carlos, California Senior 165k–190k ITAR
Python -
Staff/ Principal Avionics Engineer
24d agoPortal Space Systems Bothell, WA Principal 165k–235k ITAR
EMI/EMCFMEAFPGAsI2CSPI -
Senior Test Engineer - Space
1mo agoAntares Los Angeles Senior 155k–205k ITAR
-
Senior Motor Control Engineer
1mo agoTrue Anomaly Denver, CO or Long Beach, CA Senior 135k–200k ITAR
C++ -
Senior Battery Engineer
2mo agoCowboy Space Kent, Washington Senior 167k–230k ITAR